Author: Hamuro

PRODUCT PACKAGE AND CONTENTS PRODUCT DESCRIPTION Deepstomp DIY Digital Guitar Pedal Kit with Bluestomp ME-1 Multi-Effect CPU module is a components kit containing complete unassembled parts to build a multi-effect stompbox/pedal featured with: Guitar chromatic tuner Integrated noise gate expander and compressor (with off-level and on-level controls for the noise gate, and with compression start level, compression amount/ratio, attack time, […]

Description Deepstomp DIY Digital Guitar Pedal Kit without the CPU module. Kit Contents Pedal Enclosure Case Molded plastic material (2 mm thick) Size: 40 mm x 60 mm x 120 mm Vinyl label sticker Deepstomp Main Board PCB (DSPCB-12) Components Package Components Package Contents Resistors R1,R2,..,R42 ……. 42 x Resistors Switch, potentiometer, and knobs VR1,2 …… 2 x 10K Potentiometer […]

Description HM936D-PCB is a double-side printed circuit board for soldering station circuit that support power LED indicator, heater driver indicator, up-down push button switch interface, RTD/Thermocouple selection jumper or switch, and 3 digit seven segment display for displaying both set point and the actual temperature. Documents Hardware circuit schematic diagram and system design reference PCB manual (only in bahasa Indonesia)

Description Description DSPCB-12 is a printed circuit boards package for Deepstomp main board (circuit version: 1.2). It contains two pieces of PCBs (panel PCB and CPU mounting PCB). PCB Specification PCB material: FR4 1.5 mm Layer count: 2 Plated through hole: yes Solder adhesive coating: HASL (with lead) Solder mask: yes Silk screen (label) Size : 53 mm x 97 […]

Product Description HMC936D-AM8 is a controller chip for HM-936D digital soldering station controller board. The controller is implemented using ATMEGA8 microcontroller, programmed with lock protection to disable the chip for being read or modified. It runs on 8MHz  internal factory calibrated RC clock, so there is no need to provide XTAL and its related capacitors. The operational menu, custom sensor calibration […]

Description Bluestomp ME-1 is a programmable (reprogrammable) Deepstomp CPU board with embedded multi-effect application, protected with license code, encryption, authentication, authorization, and digital signature. Features (Current Version 1.0) Included with Deepstomp’s Standard Effects (V1.5): Chromatic guitar tuner Integrated noise gate expander and compressor module Included Advanced Effects: Distortion (with overdrive, fuzz, and fold-back modes, without tone control) Tremolo modulator (with […]