Free Electronic Circuit Design
To capture your guitar chord or notes and freeze it infinitely, you’ll probably need a freeze pedal (like EHX’s freeze pedal for example) that capture the snapshot of the audio spectrum to resynthesize the continuous audio waveform representing the captured sound. Fortunately, now you can build yourself a freezer pedal that has all that functions using a small DT-AFRZ module. […]
Read more
Introduction to DT-FOG Module Unlike other polyphonic octaver pedals those have significant latency, DT-FOG module produce octave and sub-octave with almost imperceptible latency. The DT-FOG module processes transient and non-transient signal components separately. This separation enable the transient processor to have superfast latency as low as 1/100 seconds (10 milliseconds), and the non-transient processor to have a good frequency resolution […]
Read more
WARNING! As of August 30th 2023, BWE-VO3 module is discontinued (obsolete), replaced by DT-VO4 vocoder module. Refer to the following documents to build DT-VO4 Vocoder: DT-VO4 Vocoder Module User Manual DT-VO4 Application Note (BUILDING GUITAR VOCODER PEDAL USING DT-VO4 MODULE AND BGPM-2 PCB) Introduction BWE-VO3 is a vocoder effect module designed for guitar effect pedal application, based on digital simulation […]
Read more
The PDM (pulse-density modulation) has been widely used in the current technology of audio signal conversion (from analog to digital) because its simplicity while achieving high quality conversion. This technology is widely used in digital microphone, and it is basically a sigma delta modulator circuit which is used in many modern audio codec chip as well. It is an interesting […]
Read more
Introduction to Reverberation Before getting into the design of DIY reverb pedal circuit, lets see the concept of reverberation first. Real reverberation happens in a performance chamber when the walls and every object inside reflects the sound back and forth. As the sound bounces back and forth in three dimensional space, the reflections creates more and more complex pattern. The […]
Read more
The previous music-controlled disco light controllers, the audio-controlled disco light controller circuit and hi-lo (treble-bass) disco light controller have some features and drawbacks. The first one features high voltage drive, enable the circuit to drive 220VAC lamps, and the drawback is that it has only one way (single channel control). In the other side, the second version has two-way (bass […]
Read more
To get various characteristic of an auto wah/quack effect, we need a flexible control of the envelope detection characteristic. Some playing styles need slow attack but fast decay, but some others don’t. Employing the envelope detector circuit presented in our previous article [Ref 1], but with some modification to make it single supply operation. Here we present the improvement of […]
Read more
Introduction to Automatic Wah/Quack Effect Automatic wah/quack effect gives a similar effect with the manual version (reference [1]), but without the need of any pedal to manually control the frequency/tonal sweep. This automation is made possible by detecting the envelope signal of the instruments audio signal, and use it to control the filter to produce center frequency sweep, producing audio […]
Read more
A type of guitar effect pedal that produce “wah”- or “quack”-like sound, which is similar to the crying sound of a baby is called wah-wah pedal, or just wah pedal. The effect is produced by filtering the musical instrument through a band-pass filter, which the center of its peak frequency is swept from low to high, mimicking audio tonal transition […]
Read more
Introduction: What is Fold-Back Distortion? I was introduced to a term of “fold-back distortion” in the past by an article from an old book which I forget what the title is, but the book contains schematic diagrams of many circuits collected from old publication of Elektor magazine (www.elektor.com). The article presents the circuit’s schematic diagram and how it works. I […]
Read more
Introduction While almost every audio equipments pay whatever it cost to minimize distortion, this kind of device does the opposite: distortion effect for electric guitar. Many methods have been implemented in producing a distorted signal from electric guitar pick-up, such as over-driven vacuum tube, solid-state (transistor), or diode clipper. The simplest form is passive diode clipper, which is implemented as […]
Read more
Using high (treble) and low (bass) frequency beat detection to control stage lamps can produce automatic light jockey for disco or any music performance. Instead of using general level of music signal to control a disco lamp, the circuit presented here uses two separate channel to give more complex variation of light flashing pattern. The dynamics of music signal is […]
Read more